Muzzleloader Pics

[Andy54Hawken]

The second shot is really tight to load and I have to stop and swab out the barrel for the the third.

Rifling for modern firearms is too shallow for repeat shots with black powder / muzzle loading.
I have a theory that this is why even with the proper twist rate ..
Many modern muzzle loading rifles foul quicker than many of my antiques or a rifle with deep grooves.
Andy

 

[Spitpatch]

The little rifle I just finished has an 18", 9mm barrel.
What thickness is your patch? I'm using a .32 cal. round ball with a .010 patch and 30gr of FFG.
The second shot is really tight to load and I have to stop and swab out the barrel for the the third.

Well, as you must know, my patch thickness would be useless to anyone without an identical barrel to mine. But for what it's worth, it's an Ox-Yoke pre-lubed patch at .020" thickness. This Green River barrel has very deep, aggressive rifling.

Patch thickness is very important. Compatibility with the barrel, ball and the load is sometimes a chore to finalize.

The greatest value I have found in muzzleloading is the transfer of knowledge to when later I began handloading for blackpowder cartridges. Trial and error sometimes goes on for what seems like forever...

...but when you hit on a load assembled out of each component that agrees with the gun, the rate at which the improvement happens is nothing short of astounding.

 

[Andy54Hawken]

Top one is a pistol I made from spare parts.
The L&R lock was converted from flint to percussion.
The barrel is from an old rifle.
.54 caliber.
The hammer and side plate are antique.
Stock is hand carved maple.

The bottom pistol is from Belgium.
Circa 1840's.
Notice the "inline " percussion action.
Inline muzzle loaders ain't a new thing.
Brass barrel and action.
.36 Caliber.
Andy

 

[Andy54Hawken]

Just seem to go together.
Andy

 

[Andy54Hawken]

My two favorite gals soaking up some rays while being oiled.
Rifles were rubbed with a mixture of bear grease and deer tallow.
Makes for a great finish and period correct as well.
Andy

 

[CountryGent]

Wowza at those two rifles. Both are beauts, but the one on the left is stunningly so. 'gratz.

 

[Andy54Hawken]

Wowza at those two rifles. Both are beauts, but the one on the left is stunningly so. 'gratz.

That rifle was Loren "Doc" Brown's personal rifle...he was the rifle maker that made my Hawken Rifle.
Doc gave it to me one Veteran's Day , many years ago.
I am honored to have been gifted with his friendship and this rifle for sure.
One day...we ought to get together and I'll give you a chance to shoot 'em.
Andy

 

[Andy54Hawken]

Pistol and knife combination.
All ready for headin' down the old Santa Fe Trail.
Andy