Bronze Vendor
Gold Supporter
- Messages
- 77
- Reactions
- 202
This has been a fun one that I figured I would share with you all. Customer dropped off a non functioning post 64 Winchester 1894 in poor condition, and requested the following:
Shorten barrel to 16" and thread
Shorten stock by 1.5"
Add oversized lever loop
Add fiber optic sights with hood and rear peep/ghost
Replace any missing parts
First step was diasassembly and identification of what parts were needed to get this thing working. The firing pin, finger lever pin, and finger lever stop screw were found to be missing. I found replacements available on Numrich and got them ordered. Slim pickings on the firing pin, I'll have to deal with the rust.
Shorten barrel to 16" and thread
Shorten stock by 1.5"
Add oversized lever loop
Add fiber optic sights with hood and rear peep/ghost
Replace any missing parts
First step was diasassembly and identification of what parts were needed to get this thing working. The firing pin, finger lever pin, and finger lever stop screw were found to be missing. I found replacements available on Numrich and got them ordered. Slim pickings on the firing pin, I'll have to deal with the rust.
![20240519_202343.jpg 20240519_202343.jpg](https://data.northwestfirearms.com/attachments/1294/1294510-958ce71c50c978f174781d8b5a90a879.jpg)
![20240519_195450.jpg 20240519_195450.jpg](https://data.northwestfirearms.com/attachments/1294/1294511-7019184926f2e13d19da4173d575545c.jpg)
![20240519_202425.jpg 20240519_202425.jpg](https://data.northwestfirearms.com/attachments/1294/1294512-4169f8d40e1588478f6907c4fe812ac0.jpg)