Custom Shell Holder - Reloading

[SCannon]

Got frustrated last week reloading for my rifle, decided to print my own shell holding plate to be better organized. With kids I sometimes have to step away and when I come back I'm not sure where I left off for each step (i.e. which casing has powder in it). For my bolt guns I usually load 20 at a time and depending on which caliber, I wanted something that would be better matched to the brass size and taller to better hold the brass. So I will be printing a couple versions of this with different sized holes. I also wanted to be able to have separate blocks for each stage of loading - Prepped Brass, sized, trimmed and primed, powder charged, etc. Printing the first block now, will see how it turns out.

Read More

 

[DizzyJ]

Very cool!

 

[SCannon]

Finally got it to print right, after 3 attempts. Didn't have a magnum case at work but should fit very nicely with the bigger case.

 

[quneur]

Print two with the extra to use as a cap and double use as an ammo box.

 

[SCannon]

Print two with the extra to use as a cap and double use as an ammo box.

That's a good idea