Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Palmetto owns them now.Things have gotten worse. The earlier Harrington & Richardson closed their doors circa 1986, shortly thereafter New England Firearms took over the building, made NEF and H&R single shot products all over again. Which continued through the Marlin buyout, and eventually Remington finished them off. But during that time, hundreds of thousands of single shot, break-open shotguns and rifles were made. Budget priced but fairly quality arms.
Update to today. NEF and H&R single shots are somewhat sought after. Especially barrels. Because of the interchangeable nature of them. What's happening now are people are breaking the guns up into parts, selling barrels separately online for more than entire guns might bring elsewhere. I see multiple receivers (frames) sold in lots on GB. I hate to see perfectly good firearms broken up for sale as parts, but that's the economics of it. For now.
H&R and later NEF factory people referred to the single shot receiver / frame as the "Baystate." Because it's roughly shaped like the state of Massachusetts, which is known as the Bay State. Where the factory was located.
JJE (Palmetto's parent corp.) to date hasn't made Handi Rifle number one. And probably won't, either. They were interested in the H&R brand in order to apply it to retro versions of what HRA made for military contracts, i.e., M1 Rifle, M14 and M16. Remington gave up on H&R stuff, and for some of the same reasons I doubt JJE will take it up again given the economics of it. But anything can happen. If semi-autos eventually get banned, then slides and bolt actions, single shots might make a come-back. There is some residual market for them; Henry makes a $580 single shot that looks pretty good. They are hard to find to buy at present, even though they are still catalogued. Likely Henry is concentrating on their $1,050 rifles that they have no problem selling. Recently there has been a Henry single shot in 20 ga. for sale here on NWFA.Palmetto owns them now.
FYI: NEF and H&R 1871 are the same company. NEF was the working title of the company while they were in receivership. Because some of the paperwork used the NEF title when the company first started producing guns again, they were obligated to produce arms under both names, but the "official" title of the restructured company was H&R 1871, Inc.Things have gotten worse. The earlier Harrington & Richardson closed their doors circa 1986, shortly thereafter New England Firearms took over the building, made NEF and H&R single shot products all over again. Which continued through the Marlin buyout, and eventually Remington finished them off. But during that time, hundreds of thousands of single shot, break-open shotguns and rifles were made. Budget priced but fairly quality arms.
Update to today. NEF and H&R single shots are somewhat sought after. Especially barrels. Because of the interchangeable nature of them. What's happening now are people are breaking the guns up into parts, selling barrels separately online for more than entire guns might bring elsewhere. I see multiple receivers (frames) sold in lots on GB. I hate to see perfectly good firearms broken up for sale as parts, but that's the economics of it. For now.
H&R and later NEF factory people referred to the single shot receiver / frame as the "Baystate." Because it's roughly shaped like the state of Massachusetts, which is known as the Bay State. Where the factory was located.
Sun City Machinery, China.I looked at a new Stevens single shot not long ago, it was name badge engineered, made overseas somewhere.
Wait, do what now? Can you elaborate or point me in the right direction? Ive got a NEF .410 I attached a mauser bayonet as a kid that id love to swap barrels to something more useful than .410NEF and H&R single shots are somewhat sought after. Especially barrels. Because of the interchangeable nature of them
More or less. I have a Rocky Mountain Elk Foundation SB2 Ultra that says H&R on it, but I had another RMEF banquet rifle in .308 that was branded NEF. We've had this conversation about NEF before.A few years before the final shut down, it was decided the more basic offerings would be the NEF Pardner, while the nice versions were H&R Toppers.
NEF / H&R frames made after 1985 or so come in two versions. The SB1 shotgun frames are cast iron, the SB2 rifle frames are steel. You may use any shotgun gauge except 10 on any shotgun frame. You may use any shotgun gauge except 10 on a rifle frame. You may use centerfire pistol caliber Handi Rifle barrels on shotgun or rifle frames. You may not use centerfire rifle cartridge barrels on shotgun frames. There are some exceptions, I don't remember them, the factory started getting pissy about the accessory barrel program in later stages. Remington discontinued it entirely. Think about it, why supply barrels that might cut the company out of the sale of a complete new rifle??Wait, do what now? Can you elaborate or point me in the right direction? Ive got a NEF .410 I attached a mauser bayonet as a kid that id love to swap barrels to something more useful than .410
This is great info, thank youNEF / H&R frames made after 1985 or so come in two versions. The SB1 shotgun frames are cast iron, the SB2 rifle frames are steel. You may use any shotgun gauge except 10 on any shotgun frame. You may use any shotgun gauge except 10 on a rifle frame. You may use centerfire pistol caliber Handi Rifle barrels on shotgun or rifle frames. You may not use centerfire rifle cartridge barrels on shotgun frames. There are some exceptions, I don't remember them, the factory started getting pissy about the accessory barrel program in later stages. Remington discontinued it entirely. Think about it, why supply barrels that might cut the company out of the sale of a complete new rifle??
The barrels are basically physically interchangeable. Sometimes they are too tight or too loose at the pivot point. You can adjust these to have proper headspace if the fit is off. If it's too tight, file or sand some material away from the pivot arch in the barrel mount. If it's too loose, you can solder some metal shim material into the arch.
SB1 barrels aren't too expensive, they are on ebay and GB all the time. Because people are breaking the guns down to sell for more money as parts. The SB2 rifle barrels have gotten very spendy lately. I'm seeing barrels selling for what you can sometimes buy a complete rifle for. .357 and .44 Mag barrels are out of sight.
The online "bible" for H&R and NEF single shots is Graybeard Outdoors. Lots of good stuff there.
It was from an announcement I read from H&R 1871 (don't ask for a link. It probably doesn't exist anymore).More or less. I have a Rocky Mountain Elk Foundation SB2 Ultra that says H&R on it, but I had another RMEF banquet rifle in .308 that was branded NEF. We've had this conversation about NEF before.
In later years, the NEF brand was also used on foreign-made pump shotguns that had no material connection to the SB1 and SB2. I think Marlin started this before they sold out to Remington in 2007. I've seen these with serial number prefixes having U, W, X and Y. This date range spans Marlin and Remington ownership. Marked "Made in China Hawk Industries Ltd." Remington and Marlin "made" guns had these same markings: "New England Firearms, H&R 1871, Ltd." The NEF pumps made in China under Marlin had a nicer finish. The ones I've seen, Marlins seem to have wood furniture and Remingtons have black plastic.
For general information for whomever.Not sure why that was included in your reply.
It might be that someone has you on ignore and you can't see their posts. One way to tell is to log out and peruse the thread as a visitor....it appears something(s) have been stricken from the thread.
The thread looks normal to me, going back a couple of pages there are no missing post numbers. Are you seeing missing post numbers?...or I could ask my wonderful friend to just let me know if the thread looks normal to them.
Do you see the parts I'm not seeing, oremike?
Bidenomics...Just checked, the other day. The $99 Hatfield is now $106!
That's still a fantastic bargain.This happened today. $140 out the door (not $99 ). Sadly, I was not able to dress it up in S&M gear like the op. I still like it, though. I'll probably shorten the barrel a bit. I'll play with it when I have time later.
View attachment 1372081 View attachment 1372082 View attachment 1372083
Ah ha! I never thought to check post #'s.The thread looks normal to me, going back a couple of pages there are no missing post numbers. Are you seeing missing post numbers?
lead slinger is more like it.It looks like the lead singer of Judas Priest....