Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hodgdon | Titegroup | 1.100" | 3.2 | 855 | 22,500 CUP | 3.6 | 929 | 27,500 CUP |
I just made up some of those.
147 gr Xtreme Plated Hollow Point, 3.45 gr Titegroup.
Cycles, and locks slide, moderate recoil in...
G17,
G26,
CZ p10s,
Girsan p35.
I was looking for decent accuracy in the Girsan, a Hi-Power clone.
The gun looks great, just has disapointing accuracy, and I see no reason why.
Seems to do best with heavy, slow loads.
I ran COL's from 1.080 to 1.169. The long ones just barely fit in the mags.
The Girsan seemed to prefer the longer rounds.
The standout was the p10s...it shot both long and short extremely well.
The G17 did not like the 147's much, the G26 was good.
I settled on 1.105 for COL. The longer loads fed but were "notchy" feeding, especially in the p10s.
3.9 gr Accurate #2, at 1.159 ish was softer shooting with better accuracy in the G17, and p35.
Joe
That's a pretty stout load of Tite Group using a 147 gr. bullet.4.2 grains of CFE Pistol beneath a 147 grain coated or plated bullet is my go to 9mm target round in a full size pistol.