Gold Supporter
- Messages
- 25,162
- Reactions
- 38,344
Welcome to Delta Team Tactical - Unbeatable Prices on the Best Tactical Gear
www.deltateamtactical.com
- I agree to the classified rules and terms of service
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Yes something like this:Do you need a detected lower?
No advantage I am aware of. Just another cartridge option for the most versatile firearm platform on the planet.What is the advantage to 45acp in ar15 platform? At 16" barrel, is it still aubsonic at the business end?
I've never heard of a 230 grain .45ACP bullet going super sonic in any barrel length. It's an excellent cartridge for suppressors.What is the advantage to 45acp in ar15 platform? At 16" barrel, is it still aubsonic at the business end?
In the AR platform? If so how heavy of a buffer are you using?You can shoot some suuuuuper hot 45super loads and get well beyond 44mag power. This would be a fun setup. I have a 185gr 45 super load that is pushing 1480fps (900ft/lbs) and a 230gr load going about 1250fps. And that's out of a 5" barrel
Oh no no. Sorry that's out of my 5" 1911. But out of a 16" barrel I'd imagine you'd add a couple hundred fps at least.In the AR platform? If so how heavy of a buffer are you using?
What mods did you make to your 1911. I have some 45 super brass and would like to try it someday maybe in one of my Tisas 1911sOh no no. Sorry that's out of my 5" 1911. But out of a 16" barrel I'd imagine you'd add a couple hundred fps at least.
You should! Always use 45 super brass. Starline says it's 460 rowland brass cut down. So in theory if your gun can handle it and you have good chamber support you can get close to 460 rowland numbers.What mods did you make to your 1911. I have some 45 super brass and would like to try it someday maybe in one of my Tisas 1911s
What pressure signs are you looking for?You should! Always use 45 super brass. Starline says it's 460 rowland brass cut down. So in theory if your gun can handle it and you have good chamber support you can get close to 460 rowland numbers.
I did a 24lb recoil spring and a shock buffer from Wilson combat. Cost me like $35 shipped. I'm using 45 super brass with a 185gr nosler JHP over 12.0gr of power pistol for the 900ft/lbs load. I worked up from about 10grs and still don't see any over pressure signs. I don't wanna go any higher without a compensator though to slow the slide down a bit. Makes one hell of a fireball
View attachment 1811998
Flat primers, primer flow, case head bulge. Haven't noticed anything yet. I am using S&B large primers which don't have a pistol or rifle designation that I can see. They seem to be working phenomenally though.What pressure signs are you looking for?
Use code February2024 to save 7% off of this upper or pretty much any other items they sell.Welcome to Delta Team Tactical - Unbeatable Prices on the Best Tactical Gear
www.deltateamtactical.com